Product Reviews

VIVO STAND-V257R Review: A Desk Mount for Two Large Ultrawides

A desk-clamp mount for buyers stacking two large ultrawide monitors who need broad positioning adjustments and a VESA pattern their screens support.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The VIVO Dual Vertically Stacked Ultrawide Monitor Desk Mount review centers on a specific challenge: holding two large screens one above the other while keeping both adjustable.

Its capacity and mounting options make it a candidate for ultrawide workstations, provided both monitors, the desk, and their VESA patterns fit its limits.

VIVO STAND-V257R Review Summary

The quick verdict

VIVO STAND-V257R
4.5/5

2,000+ ratings

Read Amazon Reviews

VIVO STAND-V257R

A desk-clamp mount for buyers stacking two large ultrawide monitors who need broad positioning adjustments and a VESA pattern their screens support.

  • Designed to hold two ultrawide screens in a vertical stack, each up to 57 inches.
  • Maximum supported weight is up to 48.4 pounds per curved screen or 59.4 pounds per flat screen.
  • The bottom arm tilts from +55 to -35 degrees, swivels through 132 degrees, and rotates 180 degrees; the top arm swivels and rotates through 360 degrees.
  • Height adjusts along the center pole.

Pros

  • Accommodates two very large ultrawide screens in a vertical layout.
  • The stated weight limits distinguish between curved and flat displays, allowing buyers to check the relevant capacity.

Consider before buying

  • The desk must fit the mount's relatively specific thickness limits for whichever attachment method is chosen.
  • The 57-inch size limit alone does not establish fit: each screen's weight, curvature, and VESA pattern also matter.
Read the full review summary

The STAND-V257R is designed for two vertically stacked ultrawide screens, with support for monitors up to 57 inches and different maximum weights for curved and flat screens.

Its wide range of tilt, swivel, and rotation adjustments can help tailor the viewing position, while a center pole provides height adjustment and cable clips offer a route for organizing power and AV cords.

This is best suited to buyers who have already checked the size, weight, and mounting pattern of both screens and want to keep a tall dual-monitor arrangement on a desk clamp or grommet mount.

It is less compelling for conventional, lighter monitors or setups that need a freestanding base; those buyers may prefer a mount designed around their screen sizes and desk layout.

The buying factors

VIVO STAND-V257R Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Large-screen compatibility

Supports two ultrawides up to 57 inches, with maximum load capacities that vary by whether the screens are curved or flat.

8/10

Adjustment range

Tilt, swivel, rotation, and center-pole height adjustment provide several ways to set screen angles and positions.

8/10

Mounting flexibility

Includes a heavy-duty C-clamp option and an optional grommet mount, each with a stated desk-thickness limit.

8/10

VESA coverage

Supports several common patterns through 200 x 200 mm, though buyers should confirm both screens’ exact hole spacing.

6/10

Cable organization

Clips on the center pole can route power and AV cords, but the described cable-management points are limited to that pole.

7/10

Setup fit

The capacity is useful for large stacked displays, but buyers must verify screen weight, desk thickness, and a suitable mounting surface before ordering.

Key Features and Specifications of VIVO STAND-V257R

  • Designed to hold two ultrawide screens in a vertical stack, each up to 57 inches.
  • Maximum supported weight is up to 48.4 pounds per curved screen or 59.4 pounds per flat screen.
  • The bottom arm tilts from +55 to -35 degrees, swivels through 132 degrees, and rotates 180 degrees; the top arm swivels and rotates through 360 degrees.
  • Height adjusts along the center pole.
  • Mounts with a C-clamp on surfaces up to 1.45 inches thick or an optional grommet mount on surfaces up to 1.26 inches thick.
  • Cable clips on the center pole help organize power and AV cords.
  • Detachable VESA plates support 75 x 75, 100 x 100, 200 x 100, 100 x 200, and 200 x 200 mm patterns.

Pros and Cons of VIVO STAND-V257R

Pros

  • Accommodates two very large ultrawide screens in a vertical layout.
  • The stated weight limits distinguish between curved and flat displays, allowing buyers to check the relevant capacity.
  • Separate adjustment ranges for the upper and lower arms give users control over screen orientation and angle.
  • Offers both clamp and grommet mounting approaches for compatible desks.
  • Detachable VESA plates and center-pole cable clips address installation and cord routing.

Consider before buying

  • The desk must fit the mount's relatively specific thickness limits for whichever attachment method is chosen.
  • The 57-inch size limit alone does not establish fit: each screen's weight, curvature, and VESA pattern also matter.
  • The described mount attaches to a desk; buyers wanting a freestanding base should look at a different design.

Who Should Buy VIVO STAND-V257R?

Good fit

Consider the STAND-V257R if your goal is to stack two large ultrawides and you want each display to have meaningful positioning adjustment.

Before choosing it, check the weight of each screen against the appropriate curved or flat limit, and confirm that both use a supported VESA pattern.

Also measure the desk at the intended mounting point. The C-clamp and optional grommet mount have different maximum thicknesses, so identify which attachment suits your surface and layout before buying.

If those compatibility checks pass, the two-arm arrangement and height adjustment offer a focused solution for a tall dual-screen workstation.

Who should skip it

Skip this mount if either monitor exceeds its applicable size or weight limit, lacks one of the listed VESA patterns, or your desk cannot accommodate either mounting option.

A stacked dual-ultrawide setup is also a poor match if you want side-by-side placement or a freestanding stand.

How the VIVO STAND-V257R Fits a Stacked Ultrawide Setup

Check both displays before choosing

Screen size is only one part of compatibility. The mount supports up to 57-inch displays, but curved screens have a lower stated weight ceiling than flat screens.

Weigh each display and check its rear mounting-hole pattern; a screen within the size limit can still fall outside the supported weight or VESA range.

Plan the desk attachment

The mount is secured to the desk with a C-clamp or optional grommet mount.

Their maximum surface thicknesses differ, so measure the desk where the hardware will actually sit and consider whether the chosen location leaves enough room for the attachment. The product description does not specify a freestanding base option.

Use the separate arm movements deliberately

The upper and lower arms have different swivel and rotation ranges, and the lower arm also has a stated tilt range. That distinction can help when setting two screens to different angles or orientations.

The center pole adjusts height, but the description does not give a total height range, so buyers with a specific vertical spacing requirement should check that detail before committing.

Treat cable clips as routing help

Clips on the center pole provide a place to guide power and AV cords along the mount. For a two-screen setup, consider the length and path of each cable and whether the clips align with your preferred routing.

The clips are an organizational feature, not a substitute for checking that cables reach comfortably through the screens’ full range of adjustment.

Alternatives to VIVO STAND-V257R

Computer Monitor Arms alternative

VIVO STAND-V120T Dual Ultrawide Desk Mount
4.5/5

2,000+ ratings

Read Amazon Reviews

VIVO STAND-V120T Dual Ultrawide Desk Mount

Choose the STAND-V257R when you specifically want a stacked arrangement and your screens fit its size, weight, VESA, and desk limits.

Consider the STAND-V120T if screens up to 49 inches and 44 pounds each fit your needs and its listed adjustment range suits your setup; confirm its layout works for your intended screen placement.

  • The STAND-V120T is a dual-arm mount for ultrawides up to 49 inches and 44 pounds each.
  • It provides tilt, swivel, rotation, and center-pole height adjustment, with a C-clamp or grommet option.
  • The STAND-V257R is built for a vertical stack of two ultrawides up to 57 inches, with separate weight limits for curved and flat screens and a clamp or grommet attachment.

Computer Monitor Arms alternative

VIVO STAND-V002L Vertical Dual Monitor Stand
4.6/5

3,000+ ratings

Read Amazon Reviews

VIVO STAND-V002L Vertical Dual Monitor Stand

Choose the STAND-V257R for larger, heavier ultrawides when desk attachment is suitable.

The STAND-V002L is a better fit for smaller screens and buyers who want a freestanding base, provided its screen limits and base footprint work for the desk.

  • The STAND-V002L is a freestanding vertical stand for two screens up to 34 inches and 22 pounds each.
  • Its padded base measures 15.4 by 12.4 inches, and its brackets provide tilt, swivel, rotation, and center-pole height adjustment.
  • The STAND-V257R supports two ultrawides up to 57 inches and uses a desk clamp or optional grommet mount.

Is VIVO STAND-V257R Worth It?

The VIVO STAND-V257R is worth considering when you need to stack two very large ultrawide monitors and both screens meet its weight and VESA limits.

Its arm adjustments, height positioning, cable clips, and two desk-mounting options address the practical needs of that setup.

Measure the desk and verify both displays before buying. If either screen exceeds the relevant limit, the VESA pattern does not match, or you need a freestanding or side-by-side arrangement, choose a mount designed for that configuration instead.

Your review at a glance

VIVO STAND-V257R
4.5/5

2,000+ ratings

Read Amazon Reviews

VIVO STAND-V257R

A desk-clamp mount for buyers stacking two large ultrawide monitors who need broad positioning adjustments and a VESA pattern their screens support.

  • Designed to hold two ultrawide screens in a vertical stack, each up to 57 inches.
  • Maximum supported weight is up to 48.4 pounds per curved screen or 59.4 pounds per flat screen.
  • The bottom arm tilts from +55 to -35 degrees, swivels through 132 degrees, and rotates 180 degrees; the top arm swivels and rotates through 360 degrees.
  • Height adjusts along the center pole.

Written by

greekdebttruthcommission.org Editorial Team

Editorial team

greekdebttruthcommission.org publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

VIVO STAND-V257R

VIVO STAND-V257R

A desk-clamp mount for buyers stacking two large ultrawide monitors who need broad positioning adjustments and a VESA pattern their screens support.

  • Designed to hold two ultrawide screens in a vertical stack, each up to 57 inches.
  • Maximum supported weight is up to 48.4 pounds per curved screen or 59.4 pounds per flat screen.
Check Video Reviews on Amazon